ROCKSHIELD POLLYSHIELD Click to Print This Page

USES

Acts as a protective shield for pipeline coatings both onshore and offshore.

ENERGY ABSORBENT STRUCTURE

Manufactured from high strength resilient plastic formed into a rectangular grid mat having 6 mm wide rounded rails.

PROTECTS BURIED PIPELINES

1.Backfilled with rocky materials.
2.Laid in peat or similar terrain where eventual "Bottom" after settlement is unpredictable.
3.Avoidance of damaging soil consolidation or shrinkage stresses.

PROTECTS SUBMARINE PIPELINES

1.At field welds.
2.Lay or derrick barge executed wrap and fix fabrications, spool pieces etc.

ASSISTS CATHODIC PROTECTION

The POLLYSHIELD design encourages maximum dispersion of the Cathodic Protection Current to the surface of the coating.

NOMINAL PHYSICAL DATA

Properties

TEST METHOD VALUE UNIT

Width of rails

  6.40 MM

Depth of rails

  3.20 MM

Width of spaces

  6.40 MM
Length of spaces   25.40 MM
Tensile strength (per full width)   3580.00 N
Impact ASTM G14* 32.50 NM

*Result obtained using a 73 mm tup.

APPLICATION INSTRUCTIONS
1. Individual sheets are placed around the pipe with the flat face of the bars away from the surface of the pipe.
2. The sheet ends are overlapped and secured by quick fit plastic ties provided or by circumferential strapping.
3. Each subsequent sheet is butted up to the preceding one.

P o l l y a i m
313-B, Ballards Lane, London N12 8LY, United Kingdom

Tel: +44 7518921274 Email: info@pollyaim.co.uk