|
DESIGNED FOR ALL PIPE SURFACES AND ALL AMBIENT TEMPERATURE CONDITIONS
- High molecular weight polyethylene backing with high bond adhesive.
- Furnishes a positive bond to seamed, spiral welded or extruded
pipe.
- Provides protection from chemical and electrolytic corrosion
to buried lines in extreme temperature variants.
- Available in 20 (12 + 8) and 25 (16 + 9) mil thickness (0.5 and
0.625mm) as standard.
Different thickness backing and adhesive can be manufactured
for individual customer requirements.
NOTES: Values listed are average of production run material
tested in accordance with the latest revision of applicable ASTM
specifications.
Politt - 19, Politt- 23, Politt- 27 and Politt- 35 primers are
specially formulated for use with Politt- 50 series.
|
PHYSICAL
PROPERTIES
|
|
Backing
Adhesive
Thickness Total
Thickness Backing
Thickness Adhesive
Tensile strength (ASTM D-1000)
Elongation (ASTM D-1000)
Adhesion to primed steel (ASTM D-1000)
|
Polyethylene (Black)
Synthetic Elastomers/butyl rubber base
20 or 25 mils as standard
12 or 16 mils (other variations available)
8 or 9 mils (other variations available)
30 or 35 Lbs./In. width
300 % minimum
20 Lbs./In. width |
| ELECTRICAL AND
MOISTURE RESISTANCE |
Dielectric strength (ASTM D-1000)
Insulation resistance (ASTM D-257)
Water vapour transmission rate (ASTM E -96)
Cathodic disbondment (ASTM G -8) |
1000 Volt/mil
1,000,000 megohms
0.2 grams/100-Sq.In/24hrs
0.5 inch |
| TEMPERATURE
RANGE |
Normal application range
Normal service range |
-30 to 160 deg.F
-30 to 185 deg.F |
| RESISTANCE TO
HYDROCARBONS |
(Not continuous immersion)
Aliphatic
Aromatic
Bacteria resistance (ASTM G-22)
Fungi resistance (ASTM G-21) |
Excellent
Fair
Excellent
Excellent |
* All test results by ASTM D-1000 wherever applicable.
* All test results are correct at time of print.
The information detailed in this Data Sheet is subject to modification
from time to time in light of experience and or product development.
Before using, customers are advised to check with Pollyaim Ltd.,
quoting the reference number.
All figures were indicative when data sheet went to press.
|